When resistance is called for
you need a visible difference
Click HERE to download our catalogue
Domite Wear Buttons
Easy to use and install with no pre or post heating when welding, Domite® Wear Buttons are a perfect solution for those hard to fit locations.
Available in a wide assortment of sizes the circular Domite® Wear Buttons can effectively be used on a variety of buckets, loaders, excavators, draglines and bolt protection to name only a few of the countless applications.
Perfect for adaptor protection they can be used at conveyor transfer points in any layout of pattern designed to suit your particular wear area providing maximum protection and security while minimizing the effects of heavy impact. 
Use them in conjunction with Chocky Bars, Wear Plates or individually, Domite® Wear Buttons can stand up to the toughest impact and wear abrasion.
Considered an alternative to labour intensive hard facing or cutting of expensive strips and sheets of full plate, Domite® Wear Buttons can be used to cover specific problem wear areas.
|
PART NO. |
Diameter (A) |
Thickness (B) |
Domite® (C) |
Backing (D) |
Weight |
|
D50BN |
2” (50) |
1” (25) |
5/8” (15.5) |
3/8” (9.5) |
0.9 (.41) |
|
D75BN* |
3” (75) |
1” (25) |
5/8” (15.5) |
3/8” (9.5) |
2.0 (.91) |
|
D90BN* |
3 ½” (90) |
1 3/16” (30) |
13/16” (20.5) |
3/8” (9.5) |
3.25 (1.47) |
|
D115BN |
4 ½” (115) |
1 ¼” (32) |
7/8” (22.5) |
3/8” (9.5) |
5.6 (2.54) |
|
D150BN |
6” (150) |
1 3/8” (35) |
1” (25) |
3/8” (9.5) |
10 (5.0) |
*Indicates size is available with hole in centre.
Please contact us to discuss sizes and shapes not listed.
Copyright 2009 Domite Wear Technology Inc.
Phone: 519-442-3129 Fax: 519-442-2604 Email: domite@execulink.com