FEATURES & BENEFITS

WORLD’S FIRST BONDED CWI MECHANICAL LINER

  • Provides superior wear protection for maximum abrasion & impact resistance
  • Safer & Easier to change than conventional wear parts
  • Greatly reduces downtime & maintenance
  • Completely hammerless changes outs with no special tools
  • Wear cap replacement in less than a minute,
  • Eliminates thru bolting
  • Engineered dovetail coupling design between the base plate & wear cap withstands the toughest operational forces
  • Includes 4x wear indications telling you when to rotate / change the cap.

APPLICATIONS

MOBILE PLANT

  • Suitable for Face Shovel, Excavator, Wheel Loaders, LHD Buckets, and Truck Beds
  • Recommended for the bottom & inside of buckets surfaces including convex
  • Easy change outs on the fly

FIXED PLANT

  • Ideal where access and maintenance is restrictive
  • Suitable for con ned spaces where frequent welding isn’t an option
  • Perfect for Chutes, Conveyors
  • All materials have a high heat and corrosion resistance mak- ing it suitable for Slag & Dredge applications

twistlocksystem

PATENTED TWIST LOCK SYSTEM

PIN

  • Completely hammerless locking system
  • No special tools, a common at head screw driver to turn the pin
  • CWI cover protects pin and eliminates channeling

700 BHN WEAR CAP

  • Domite CWI (700 BHN) bonded to a 400 BHN cast high strength steel jacket
  • Multiple thicknesses and styles available
  • Completely enclosed to protect the base on all 4 sides
  • Unique 4 way symmetry for easy installation from any orientation
  • Rotational symmetry allows for maximization of wear material

WELD-ON BASE PLATE

  • Re-usable base plate easily welded in place once
  • Cast of tough high-strength steel
  • 4 way symmetry for ease of installation
  • Same base ts to di erent wear cap sizes & styles

 

Tapered

TAPERED TWIST LOCK (TLT)

  • Has been designed to de ect material from all 4 sides
  • Different tapers are available on request

tapered

Standard

STANDARD TWIST LOCK (TL)

  • Provides excellent resistance to wear, designed to protect the face of the liner with Domite® CWI

standard

Domite Twist Lock

PART NO.Length (A) in. (mm)Width (B) in. (mm)Domite (C) in. (mm)Alloy Steel (D) in. (mm)Thickness (E) in. (mm)Weight lbs. (kg)
D 101 TLT (CAPS)10” (254)10” (254)5/8” (16)1 3/16” (30)1 13/16” (46)28.5 (13)
D 121 TLT (CAPS)12” (305)10” (254)5/8” (16)1 3/16” (30)1 13/16” (46)34.5 (16)
D 102 TLT (CAPS)10” (254)10” (254)3/4” (19)1 3/16” (30)1 15/16” (49)30.4 (13.8)
D122 TLT (CAPS)12” (305)10” (254)3/4” (19)1 3/16” (30)1 15/16” (49)36.8 (16.7)
D 103 TL (CAPS)10” (254)10” (254)1” (25)1 3/16” (30)2 3/16” (55)43 (19.5)
D 123 TL (CAPS)12” (305)10” (254)1” (25)1 3/16” (30)2 3/16” (55)52 (23.5)
D TLPLOCKING PIN2.5 (1.4)
D TLBBASE9.5 (4.3)
Speak to us for different sizes, material thicknesses & styles

twistlock_dimensionsMultiple Configuration

  • Multiple Domite® TWIST LOCK’s can be con gured (in straight or o set patterns) to cover large surface areas
  • Minimal 3/4” gap required between liners, this is much smaller vs slide on bases
  • Vertical & Horizontal alignment is easy, done using the 4 points of the diamond (in the centre of the base). Use top & bottom points for vertical alignment & le & right points for horizontal alignment
    (as depicted below)
  • The example below illustrates spacing set up for the 10” x 10” TWIST LOCKS

twistlock_diagrams